Filter
Top Products
Configuration: Disk Groups and Virtual Disks 123
for storage on other media. When you change a security key, you also provide
information to create a security key identifier. Changing the security key does
not destroy any data. You can change the security key at any time.
Before you change the security key, ensure that:
• All virtual disks in the storage array are in Optimal status.
• In storage arrays with two RAID controller modules, both are present and
working normally.
To change the security key:
1
In the AMW toolbar, select
Storage Array
Physical Disk Security
Change Security Key
.
The
Confirm Change Security Key
window is displayed.
2
Ty p e
yes
in the text field, and click
OK
.
The
Change Security Key
window is displayed.
3
In
Secure key identifier
, enter a string that become part of the secure key
identifier.
You may leave the text box blank, or enter up to 189 alphanumeric
characters without white space, punctuation, or symbols. Additional
characters is generated automatically.
4
Edit the default path by adding a file name to the end of the path or Click
Browse,
navigate to the required folder and enter the name of the file.
5
In
Pass phrase
, enter a string for the pass phrase.
The pass phrase must meet the following criteria:
• It must be between eight and 32 characters long.
• It must contain at least one uppercase letter.
• It must contain at least one lowercase letter.
• It must contain at least one number.
• It must contain at least one non-alphanumeric character (for example,
< > @ +).
The pass phrase that you enter is masked.
book.book Page 123 Thursday, December 9, 2010 3:20 PM