Filter
Top Products
Configuration: About Your Storage Array 73
Viewing Storage Array Connections
You can use the View Connections option to view the expansion enclosures
connected to the RAID controller module.
To view the storage array connections:
1
From the toolbar in AMW, select
Storage Array
View
Connections
.
The
<Storage Array>:Connections
dialog appears.
2
Click the column name to sort the connections according to your
preference.
3
Click
Close
.
If you receive an error message for a port, you can use this dialog to identify
the components on the port that might have caused the error. By isolating
these components, you prevent accidentally disconnecting components that
are still in operation, which could cause an interruption in data flow.
Adding/Editing a Comment to an Existing Storage Array
A descriptive comment, with an applicable storage array name, is a helpful
identification tool. You can add or edit a comment for a storage array in the
EMW only.
To add or edit a comment:
1
In the EMW, select the
Devices
tab and select the relevant managed
storage array.
2
Select
Edit
Comment
.
The
Edit Comment
dialog appears.
3
Type the 60-character comment.
4
Click
OK
.
This option updates the comment in the table view and saves it in your local
storage management station file system. The comment does not appear to
administrators who are using other storage management stations.
book.book Page 73 Thursday, December 9, 2010 3:20 PM