Filter
Top Products
124 Configuration: Disk Groups and Virtual Disks
6
In
Confirm pass phrase
, re-enter the exact string you entered in
Pass
phrase
.
Make a record of the pass phrase you entered and the security key
identifier it is associated with. You need this information for later secure
operations.
7
Click
Change Key.
8
Make a record of the security key identifier and the file name from the
Change Security Key Complete
dialog, and click
OK
.
Saving a Security Key
You save an externally storable copy of the security key when the security key
is first created and each time it is changed. You can create additional storable
copies at any time. To save a new copy of the security key, you must provide a
pass phrase. The pass phrase you choose does not need to match the pass
phrase used when the security key was created or last changed. The pass
phrase is applied to the particular copy of the security key you are saving.
To save the security key for the storage array,
1
In the AMW toolbar, select
Storage Array
Physical Disk Security
Save
Security Key
File
.
The
Save Security Key File - Enter Pass Phrase
window is displayed.
2
Edit the default path by adding a file name to the end of the path or click
Browse,
navigate to the required folder and enter the name of the file.
3
In
Pass phrase
, enter a string for the pass phrase.
The pass phrase must meet the following criteria:
• It must be between eight and 32 characters long.
• It must contain at least one uppercase letter.
• It must contain at least one lowercase letter.
• It must contain at least one number.
• It must contain at least one non-alphanumeric character (for example,
< > @ +).
The pass phrase that you enter is masked.
book.book Page 124 Thursday, December 9, 2010 3:20 PM