Filter
Top Products
Troubleshooting: Your Storage Array Software 249
Finding Nodes
You can use the Find option to search for a particular node on the Logical
tab, the Physical tab, or the Mappings tab of the Array Management
Window. The search might be based on a particular node name, the RAID
level, virtual disk capacity, or specific free capacity nodes. The search might
be based also on one of these combinations:
• The node name and the RAID level
• The node name and the virtual disk capacity
To find nodes:
1
In the AMW, select
View
Find
.
2
Based on the type of search, select one of these options, and go to the
indicated step:
• Search by name—see step 3.
• Search by special criteria—see step 4.
3
Type the name of the node to be found in
Find node
. See step 8.
4
Based on the search criteria, select one of these options, and go to the
indicated step:
• Find all virtual disks with RAID level—Go to step 5.
• Find all virtual disks with capacity—Go to step 6.
• Find all free capacity nodes—Go to step 7.
5
To search for all nodes based on their RAID level, perform these steps:
a
Select
Find all virtual disks with RAID level
.
b
Select the RAID level from the list.
c
Go to step 8.
6
To search for all nodes based on their virtual disk capacity, perform these
steps:
a
Select
Find all virtual disks with capacity
.
b
Type the capacity in the
GB
box.
c
Specify that the capacity to be matched is less than, equal to, or
greater than the capacity entered in the
GB
box.
d
Go to step 8.
book.book Page 249 Thursday, December 9, 2010 3:20 PM