Filter
Top Products
Clearing Passwords and CMOS Settings 95
Clearing Passwords and CMOS
Settings
Clearing Passwords
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 143.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 145).
3
Locate the 4-pin password connector (RTCRST_PSWD) on the system
board.
4
Remove the 2-pin jumper plug from pins 3 and 4 and set the jumper plug
aside.
5
Replace the computer cover (see "Replacing the Computer Cover" on
page 262).