Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
102
Figure 3 - 47 MLD Multicast Group Profile Settings window
To configure the group list once a profile has been created, click on the hyperlinked
Group List to reveal the following
window:
Figure 3 - 48 Multicast Group Profile Multicast Address Settings window – Group List
Enter the Multicast Address List and click Add the new information will be displayed in the table. Click <<Back to
return to the IGMP Multicast Group Profile Settings window and click Delete to remove an entry.
MLD Snooping Multicast VLAN Settings
This window is used to configure the MLD Snooping Multicast VLAN settings on the Switch.
To view this window, click L2 Features > MLD Snooping > MLD Snooping Multicast VLAN Settings as shown
below:
Figure 3 - 49 MLD Snooping Multicast VLAN Settings window
The following fields can be set:
Parameter Description
VLAN Name
This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to
modify the MLD Snooping Settings for.
VID (2-4094)
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to
modify the MLD Snooping Settings for.
State Use the drop-down menu to toggle between Enabled and Disabled.
Replace Source IP
Enter an IP address that new IP address to be used.
Member Port
(e.g.:1,6)
Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)
Source Port
(e.g.:1,6)
Select the source Port for the Multicast VLAN.