Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
28
DHCP Relay Option 61 Settings
This command is used to add a rule to the relay server based on option 61. The matching rule can be based on either
the MAC address or by using a user-specified string. Only one relay server can be specified for a MAC-address or a
string. If the existing relay servers are determined based on option 60, and one relay server is determined based on
option 61, the final relay servers will be the union of these two sets of servers.
To view this window, click Configuration > DHCP Relay > DHCP Relay Option 61 Settings as shown below:
Figure 2 - 26 DHCP Relay Option 61 Settings window
The following parameters may be configured:
Parameter Description
Client ID Use the drop down menu to select the method of identification for the Client ID either MAC
Address or String. The MAC Address will specify the hardware address of the client and the
String will specify the client ID. Choose a method and enter the appropriate information into
the box provided.
Relay Rule Use the pull down menu to choose either Relay or Drop. When drop is specified, the packet
with no matching rules found will be dropped without further process. When relay is selected
the packet will be relayed based on the relay rules. Choose a method and enter the
appropriate information into the box provided.
Click Add to create a new entry. To remove an entry, enter the appropriate Client ID information and click Delete. To
delete all entries click Delete All.
Out of Band Management Settings
This window is used to configure the RJ-45 Out-of-band (OOB) management port on the Switch. The OOB port is
physically isolated from the data channels of the Switch. This port allows administrators manage the device remotely
without the impact data channel congestion. The OOB management is a method to manage devices while sharing the
network bandwidth with other management traffic. The OOB port allows Management packets and ARP requests to
pass while other packets will be dropped.
To view this window, click Configuration > Out of Band Management Settings as shown below:
Figure 2 - 27 Out of Band Management Settings window
The following parameters may be configured: