Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
36
SNTP Settings
The Simple Network Time Protocol Settings can be configured in the next two windows.
Time Settings
This window is used to configure the time settings for the Switch.
To view this window, click Configuration > SNTP Settings > Time Settings as shown below:
Figure 2 - 41 Time Settings window
The following parameters can be set or are displayed:
Parameter Description
Status
SNTP State Use the radius button to select an Enabled or Disabled SNTP state.
Current Time
Displays the Current Time set on the Switch.
Time Source
Displays the time source for the system.
SNTP Settings
SNTP First Server
This is the IP address of the primary server the SNTP information will be taken from.
SNTP Second Server
This is the IP address of the secondary server the SNTP information will be taken from.
SNTP Poll Interval in
Seconds (30-99999)
This is the interval, in seconds, between requests for updated SNTP information.
Set Current Time
Date (DD/MM/YYYY)
Enter the current date in day, month and year to update the system clock.
Time in (HH:MM:SS)
Enter the current time in hours, minutes, and seconds.
Click Apply to implement changes made.