Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
178
NOTE: To set the Local Enable Password, see the next section, entitled
Local Enable Password.
To view the following table, click Security > Access Authentication Control > Enable Method Lists as shown
below:
Figure 5 - 41 Enable Method List window
To delete an Enable Method List defined by the user, click the correspoinding Delete button. To modify an Enable
Method List, click its corresponding Edit button.
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Priority 1, 2, 3, 4
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable – Adding this parameter will require the user to be authenticated using the local
enable password database on the Switch. The user in the next section entitled Local Enable
Password must set the local enable password.
none – Adding this parameter will require no authentication to access the Switch.
radius – Adding this parameter will require the user to be authenticated using the RADIUS
protocol from a remote RADIUS server.
tacacs – Adding this parameter will require the user to be authenticated using the TACACS
protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using the TACACS
protocol from a remote TACACS server.
server_group – Adding a previously configured server group will require the user to be
authenticated using a user-defined server group previously configured on the Switch.
Local Enable Password Settings
This window will configure the locally enabled password for the Enable Admin command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter
the password configured here that is locally set on the Switch.
To view this window, click Security > Access Authentication Control > Local Enable Password Settings as
shown below: