Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
14
Parameter Description
Interface Name
Enter the interface name of the IPv6 neighbor you wish to configure.
Neighbor IPv6
Address
Enter the neighbor IPv6 address of the entry you wish to configure.
Link Layer MAC
Address
Enter the MAC address of the neighbor device to be added as an IPv6 neighbor on the IP
interface.
Interface Name
In order to search for a previously configured Interface name enter the appropriate information
and click Find. To remove a previously configured Interface enter the Interface name and click
Clear.
State
To find or delete specific entries use the pull down menu to select All, Address, Static, or
Dynamic.
All – Select All to view all configured neighbor devices which are IPv6 neighbors of the IP
interface previously created.
Address – Select Address and enter the IPv6 address of the entry you wish to find.
Static – Select Static to view all statically entered IPv6 neighbors on the Switch.
Dynamic – Select Dynamic to view all dynamically configured neighbor devices which are IPv6
neighbors of the IP interface previously created.
Click Add to add a new entry, click Find to search for a specific entry or click Clear to remove an entry.
Port Configuration
This section contains information for configuring various attributes and properties for individual physical ports,
including port speed and flow control.
Port Settings
To view this window, click Configuration > Port Configuration > Port Settings as shown below:
To configure switch ports:
Choose the port or sequential range of ports using the From Port / To Port port pull-down menus.
Use the remaining pull-down menus to configure the parameters described below:
Figure 2 - 11 Port Settings window
The following parameters can be configured: