Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
120
Port Description
Use the drop-down menu to enable or disable port description.
System Name
Use the drop-down menu to enable or disable system name.
System
Description
Use the drop-down menu to enable or disable system description.
System
Capabilities
Use the drop-down menu to enable or disable system capabilities.
Click Apply to implement changes made.
LLDP Dot1 TLVs Settings
LLDP Dot1 TLVs are organizationally specific TLVs which are defined in IEEE 802.1 and used to configure an
individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port vlan ID TLV data types
from outbound LLDP advertisements.
To view this window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings as shown below:
Figure 3 - 70 LLDP Dot1 TLVs Settings window
The following parameters can be set:
Parameter Description
From Port / To Port
Use the pull-down menu to select a range of ports to be configured.
Dot1 TLV PVID
Use the drop-down menu to enable or disable the advertised PVID. This TLV optional
datatype determines whether the IEEE 802.1 organizationally defined port VLAN TLV
transmission is allowed on a given LLDP transmission capable port.
Dot1 TLV Protocol
VLAN
Use the drop-down menu to enable or disable the advertised Protocol VLAN ID. This TLV
optional data type indicates whether the corresponding Local System’s port and protocol
VLAN ID instance will be transmitted on the port. If a port is associated with multiple protocol
VLANs, those enabled ports and protocol VLAN IDs will be advertised.
Dot1 TLV VLAN
Use the drop-down menu to enable or disable the advertised VLAN Name. This TLV optional
data type indicates whether the corresponding Local System’s VLAN name instance will be
transmitted on the port. If a port is associated with multiple VLANs, those enabled VLAN name
will be advertised. Those enabled VLAN name will be advertised. If the numbers of VLANs are
larger, it will only bring limited numbers of VLANs due to restrictions of the package length.
Dot1 TLV Protocol
Identity
Use the drop-down menu to enable or disable the advertised Protocol Identity. This TLV
optional data type indicates whether the corresponding Local System’s Protocol Identity
instance will be transmitted on the port. The Protocol Identity TLV provides a way for stations
to advertise protocols that are important to the operation of the network. Such as Spanning