Filter
Top Products
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
48
sFlow
The sFlow folder contains four windows to enable and configure the sFlow settings on the Switch.
sFlow Global State Settings
This table is used to enable or disable the sFlow Global State Settings on the Switch. The sFlow version, address and
state configurations can also be viewed in this table.
To view this window, click Configuration > sFlow > sFlow Global State Settings as shown below:
Figure 2 - 55 Time Range Settings window
Select Disabled or Enabled and click Apply.
sFlow Analyzer Server Settings
This window is used to configure the sFlow analyzer server settings. You can specify more than one analyzer server
with the same IP address but with different UDP port numbers. You can have up to four unique combinations of IP
address and UDP port numbers.
To view this window, click Configuration > sFlow > sFlow Analyzer Server Settings as shown below:
Figure 2 - 56 sFlow Analyzer Server Settings window
The following parameters can be configured:
Parameter Description
Analyzer Server ID (1-4)
Up to four
sFlow Analyzer Servers can be configured.
Owner Name
The entity making use of this sflow analyzer server. When owner is set or modified, the