Filter
Top Products
Printing from Mac OS
14
Sample files are provided for the following programs:
• Photoshop
®
• Illustrator
®
• QuarkXPress
®
• InDesign
®
To create disc designs using one of the sample files
1 From the application program, select the program’s file open command and navigate to the
Sample Documents folder in the DYMO DiscPainter folder.
2 Select and open the sample file appropriate for the program you are using.
A blank document, pre-configured with the proper DiscPainter printer settings, is displayed.
3 Create your design and print.
Note Make sure you set the printer features that are appropriate for the type of disc you are using.
General Printing Instructions
When you are ready to print an image onto a disc, follow the steps below.
To print to a DiscPainter printer
1 Insert a blank disc into the printer (see "Loading Discs" on page 6 for information).
2 Select Print (this command is typically accessed from the application’s File menu). The Print
dialog box is displayed.
3 Select the DiscPainter printer. (If you don’t see a list or menu used to select printers, see the
documentation included with the program for instructions on selecting printers.)
4 Select Printer Features from the menu below the Presets menu.
5 Select the desired features from the Printer Features menus. See "Controlling Printer
Features" on page 9 for details about the printer features.
6 Click Print.
During printing, the Print Progress dialog box is displayed. This dialog box shows the progress of
the current print job (percentage completed, from 0% to 100%), the copy currently being printed,
and the total number of copies (“Printing copy 1 of 2,” for example).
To cancel the current print job
♦
Click Cancel Printing in the Print Progress dialog box. Printing stops at the point the printer
receives the cancel printing instruction. The disc tray moves back to the home position.