Filter
Top Products
Chapter 4: Web Configuration
91
IP Routing – Dynamic Routing
Routing Information Protocol (RIP) is utilized by means of exchanging routing
information between routers. It helps the routers to determine optimal routes. This
page allows you to enable/disable this function.
RIP Version:
It incorporates the RIP information
when receiving and broadcasting the
RIP packets. From the drop down
menu, select a RIP version to be
accepted, 1, 2 or both.
Operation:
There are two modes for you to
choose, Active and Passive. Select
Active for transmitting and receiving
data, or select Passive for receiving
data only.
Enabled:
Check Enabled to enable the RIP
function on different interface.
Otherwise, disable this function.
Click Apply to invoke the settings set
here.