Dynalink RTA1030W Network Router User Manual


 
Appendix B: Client Setup for 802.1x, WPA, and WPA-PSK
133
Appendix B: Client Setup for 802.1x, WPA, and
WPA-PSK
Retreiving Client Certificate
This step is only required if you intend to authenticate with EAP/TLS.
While there are many ways you may receive a certificate from your Certificate
Authority, the example here is to show you how to retrieve your certificate from a
Microsoft Certificate Services server via its easy web interface.
1. Please connect the client to a
network that doesn’t require port
authentictaion.
2. Open up Microsoft Explorer,
connect to your CA via the url
http://yourserver/certsrv (see
your local administrator if it has
been changed from the default).
For example, if the Microsoft
Certificate Service server uses
the IP address 192.168.0.2, then
we have to key in
http://192.168.0.2/certsrv on the
url box.
3. You will be asked to log in, use
your domain credentials. (e.g.,
ABC)