Filter
Top Products
Chapter 4: Web Configuration
69
Quick Start
The pages under the Quick Start menu provide user a quick way to set up the router.
If you do not know much about the router, you can use the Quick Start pages to
adjust basic settings to activate your router.
Connect to Internet
This is a quick way to connect to the
Internet by using PPPoE interface,
please click Connect to Internet to
open the web page.
Enter the user name and password
(that you get from the ISP) for your
ADSL router and click Connect.
The system will connect automatically,
and then you can access the Internet.
Quick Setup
The quick setup wizard will guide you
to configure the ADSL router through
some specific steps. Yet different
connection interface will lead to
different setting pages. Refer to the
following pages for detailed
information.
Auto Scan Internet Connection
(PVC):
If there is no any PVC configured in
your ADSL router, you can check this
item. Otherwise, please uncheck this
box.
VPI (Virtual Path Identifier): Identifies
the virtual path between endpoints in
an ATM network. The valid range is
from 0 to 255. To enter the setting,
please refer to the setting that the ISP
offered.
VCI (Virtual Channel Identifier):
Identifies the virtual channel endpoints
in an ATM network. The valid range is
from 32 to 65535 (1 to 31 is reserved
for well-known protocols). To enter the
setting, please refer to the setting that
the ISP gave you.
After entering the VPI/VCI value,
please click Next for the following
step.