Filter
Top Products
REPORTS 7-17
MON2000
JULY 2010 GC Printer Control
2. The GC Printer Control dialog displays.
3. Use the provided data fields, check and
combo boxes to select the desired settings.
See Table 7-8 for detailed descriptions.
4. Click the button to accept your
selections and return to the main window.
Click the button to abort and
return to the main window.
You can, for example, set a
report to print after each
analysis and every 12 hours.
Table 7-8 Description of Settings for GC Printer Control
Setting Description
Anly Enables/disables report printing after each analysis run regardless of report type
selected.
Cal Enables/disables report printing after each calibration run regardless of report type
selected.
FCal Enable/disable report printing after every final calibration run regardless of report
type selected.
Time Time at which report should print at 24-hour intervals.
To disable this feature, set Time to 00:00 or 12:00 AM.
The Time setting overrides the Hours setting and only applies to streams that are
enabled (i.e., checked ON) for report printing.