Filter
Top Products
Diagnostic Programs A-3
Distribution Diskette
The diagnostic diskette contains these files:
• platform.exe
• localx86.bin
• help.txt
• help.idx
• readme.doc
• @6141.ADF
• !emu0000.cfg
• !emu0008.cfg
Check the diskette to make sure all these files are present, then make a
backup copy of the diagnostic diskette for regular use. If you plan to run
diagnostics from a hard drive, create a subdirectory on the hard disk and,
copy the files into that subdirectory. Place the original Emulex diskette in a
safe place.
Diagnostic Platform Instructions
The Diagnostic Platform can be used to configure and run diagnostics on
several adapters at the same time. The boards may be all the same type or any
combination of supported models. The list of tests and their order of
performance are individually configurable for each board.
Loading and Running the Diagnostic Platform
1) Boot the system under DOS and insert the Emulex diagnostic diskette in
drive A:
2) Set the default drive path to: A:
3) At the DOS prompt, type:
>
A:Platform
The Diagnostic Platform Main Menu appears. You are now ready to
configure the Platform and run the desired diagnostics.
Alternatively you may copy the diagnostics to your hard drive and load and
run from the hard drive.