Filter
Top Products
Software Installation 4-3
After a short delay, the Installation Options menu appears.
Figure 4-3 Installation Options Menu
Select Install on Local Server Only, then press <Enter>.
The INSTALL program copies several files from the INSTALL diskette
to a local directory.
5) When the source files have been copied, the following message is
displayed:
Installation was successful. Bring down and restart each
server on which you installed the software to ensure that it
uses the newest NLM files.
<Press Enter to continue>
6) Press <Enter>. The Installation Options menu will again be displayed.
7) Select
Display Log File after install to check for any installation
problems. A list of files that were not installed (for any reason) will be
displayed at the bottom of the Display Log File.
8) Select
Display README Files for new additions or information.
9) Select <Exit> to continue the installation procedures.
10) The list of Currently Installed Products is again displayed. Verify that
EMULEX WAN for NetWare has been added to the list.
11) Highlight EMULEX WAN for NetWare and press <Enter> to access
the Internetworking Configuration menu.
12) You are now ready to configure the Emulex DCP_link adapter and create
specific WAN links. Please turn to
Chapter 5, Software Configuration
to continue.