Filter
Top Products
Diagnostic Programs A-7
Exit - In the Main Menu, selecting the Exit option exits the Platform and
returns control the PC to DOS.
Using DCPDIAG3 for the DCP386i
This section describes the operation of the diagnostic program supplied with
the DCP386
i/e. The diagnostics test all functions of the DCP386i/e,
including on-board memory and registers, host memory, interrupts to and
from the card, and the microprocessor.
Diagnostic Operating Requirements
To run diagnostics for test and verification of DCP386i adapters, these
minimums are required:
• IBM PC, PC/AT, PC/XT, or compatible
• 512KB of RAM
• A floppy diskette drive
• DOS version 3.0 and above
Additionally, some tests that are NOT selected by default, require either
loopbacks or null modems.
README.DOC
The README.DOC file is a non-executable file which contains an
explanation of each diagnostic program on the diskette. To read the file,
place the diskette in drive A and type:
>
A:README.386 ⎜ MORE
To scroll through the display, press the spacebar. To exit this file at any time,
press <Ctrl>C.
Distribution Diskette
The diagnostic diskette contains the following files:
• dcpdiag3.exe
• dgdcp386.bin
• help386.txt
• readme.386