Filter
Top Products
6-6 Chapter 6
Configuring the Network Interface
To configure network interface parameters for Emulex Frame Relay
software, load the INETCFG Internetworking Configuration menu:
1) At the server prompt, type
>
LOAD INETCFG <Enter>
The Internetworking Configuration menu is displayed.
Figure 6-1 Internetworking Configuration
2) Select Network Interfaces, then press <Enter>
The Network Interfaces window is displayed.
Figure 6-2 Network Interfaces
3) The network interfaces for the Emulex DCPx86i/e adapter will be
displayed. Each interface is associated with a physical port. Select the
port (interface) for configuration and press <Enter>.