Filter
Top Products
Because superscript and subscript characters are smaller, when you
define them you only need two bytes of data for each vertical row of
dots. Design grids for these characters are shown in the figure below.
Draft pica
Letter Quality
and Proportional
Mixing Print Styles
Each of the three user-defined character modes (draft, Letter Quality,
and proportional) can be used in combination with most of your
printer’s various print styles. For instance, emphasized mode works
with user-defined characters. The characters you design are
enhanced to give this printing effect.
Mixing the three types of user-defined character sets is not possible.
For example, if you select draft and define some characters, then
select proportional and define some more, the first draft character
definitions are deleted. Only one type of character definition may be
stored in RAM at any time.
If you define characters in one mode, then switch to another mode
and select the user-defined character set, the command is ignored
and nothing is printed. The user-defined character definitions,
however, remain unaffected. If you switch back to the mode in
which they were defined, you can then select and print them.
Software and Graphics
4-27