Filter
Top Products
ESC p
Turn Proportional Mode On/Off
Format:
ASCII code:
ESC
p
n
Decimal:
27
112 n
Hexadecimal: 1B 70 n
Comments:
Turns proportional mode on and off.
The following values can be used for n:
1: Turns mode on.
0: Turns mode off.
The width of proportional characters varies from character to
character. Therefore, a narrow letter like i receives less space than
a wide letter like W. Proportional character widths are given in
the Appendix. Proportional mode is available only in Roman and
Sans Serif fonts.
SI
Select Condensed Mode
Format:
ASCII code:
SI
Decimal:
15
Hexadecimal: OF
Comments:
Prints characters at about 60 percent of their normal width. For
example, the condensed 10 cpi mode has 17 characters per inch.
Condensed mode cannot be combined with 15 cpi. Condensed
can be turned on and off by SelecType, the SI command, or DIP
switch 1-6.
Command Summary
9-25