Filter
Top Products
Commands Arranged by Topic
ESC b
Set Vertical Tabs in Channels
Format:
ASCII code:
ESC b c n1 n2 … 0
Decimal:
27 98 c n1 n2 … 0
Hexadecimal: 1B 62 c n1 n2 … 00
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be from 0 to 7. Therefore,
up to eight sets of vertical tabs can be set. The channels are
selected by ESC /. To clear the tabs in channel c, use ESC b c 0.
ESC /
Select Vertical Tab Channel
Format:
ASCII code:
ESC / c
Decimal:
27 47 c
Hexadecimal: 1B 2F c
Comments:
This command is used to select the vertical tab channel, with the
value of c from 0 to 7. All subsequent VT commands use the
channel selected by this command. If no channel has been
selected, channel 0 is used.
9-18 Command Summary