Filter
Top Products
If the page perforation is not properly aligned with the tear-off edge,
you can adjust the tear-off position using micro-adjustment, as
described below.
Note: Short tear-off is performed whenever the printer receives a
full page of data or a form feed, and no more data is received for
three seconds.
When you resume printing after tearing off the sheet, the paper
automatically feeds backward to the loading position before printing
begins.
Adjusting the Tear-off Position
If the paper’s perforation does not meet the tear-off edge, follow
these steps to adjust the tear-off position.
1.
Make sure the printer feeds the paper to the tear-off position
after printing the document.
3-20
Using the Printer