Filter
Top Products
Commands Arranged by Topic
ESC D
Set Horizontal Tabs
Format:
ASCII code:
ESC D n1 n2 … 0
Decimal:
27 68 n1 n2 … 0
Hexadecimal: 1B 44 n1 n2 … 00
Comments:
This command allows setting of up to 32 horizontal tabs, which
are entered as n1, n2, n3, etc. (from 1 to 255), with the number 0
terminating the command. The tab settings must be entered in
ascending order. ESC D 0 clears all tabs. The default settings,
when power is turned on or after an ESC @ command, are at every
eight characters. The tab settings are not affected by changes in
cpi. The tab positions in proportional printing are determined by
the 10 cpi character size.
Overall Printing Style
ESC x
Select Letter Quality or Draft
Format:
ASCII code:
ESC
x
n
Decimal:
27
120 n
Hexadecimal: 1B 78 n
Comments:
The following values can be used for n:
0: Selects draft mode.
1: Selects Letter Quality (LQ) mode.
Overrides the SelecType panel setting.
ESC k
Format:
ASCII code: ESC k n
Decimal:
27 107 n
Hexadecimal: 1B 6B n
Select Typestyle Family
9-22 Command Summary