Epson 1010 Printer User Manual


 
Setting the DIP Switches
The printer has two sets of DIP switches located under a small cover
above the control panel. By changing the settings of these switches,
you can control various printer features, such as the character set
and page length. The new settings become effective when the printer
is turned on, reset, or initialized.
DIP switch settings are shown in the DIP switch tables later in this
section. Descriptions of all the DIP switch functions follow the
tables.
Changing a DIP Switch Setting
To change a DIP switch setting, follow these steps:
1.
Turn off the printer.
2.
Open the DIP switch cover and use a pointed object, such as a
pen, to change the DIP switch settings. A DIP switch is on when
it is up, and off when it is down.
The new DIP switch settings take effect when the printer is turned on.
Using the Printer
3-11