Epson 1010 Printer User Manual


 
CAUTION: Make sure you tear off your printed document
before pressing the LOAD/EJECT button. Reverse-feeding
several pages at a time may result in a paper jam. This is
especially true for narrow paper (less than 6 inches or
150 mm wide).
3.
Press the LOAD/EJECT button to feed the continuous paper
backward out of the printer and into the standby position. The
paper is still attached to the tractor but no longer in the paper
path.
Note: Pressing the LOAD/EJECT button once may not feed the
paper far back enough to reach the standby position. If the
PAPER OUT light does not come on, you need to press the
LOAdD/EJECT button again. With normal-width continuous
paper, you can press the LOAD/EJECT button up to three times.
If, however, you are using narrow paper (between 4 and 6
inches or 100 and 150 mm) you should only press the
LOAD/EJECT button once. Also, do not use this button to eject
labels.
Paper Handling
2-17