Filter
Top Products
The print position is not what you expected.
l
Printing starts too high
or
too low on the page.
Use micro-adjustment to adjust the loading position.
Check the top margin set by your application software and
adjust it.
l
All the text is printed on the same line.
Set DIP switch 2-4 on so the printer automatically adds a line
feed code to each carriage return.
l
The text is printed with an extra blank line in between.
Two line feed signals are being sent. Set DIP switch 2-4 off.
l
Page length does not match the length of the paper.
Check the page length set by DIP switches 1-4 and 1-5.
Check the page length set by your application software and
adjust it if necessary.
l
Regular gaps
occur
in the printout.
One-inch skip over perforation may be set. Set DIP switch 2-3 to
off.
l
Skip over perforation is set, but the perforation does not fall in the
center of the skip.
Adjust the loading position.
Troubleshooting 7-5