Filter
Top Products
Setting Up Your Application Software
Now that you have set up and tested the printer, you should make
sure that it works with your application programs.
Most application programs let you specify the type of printer you
are using so that the program can take full advantage of the printer's
features. Many of these programs provide an installation or setup
menu that presents a list of printers to choose from.
If your application program has a printer selection menu, use the
instructions below.
Choosing From a Menu
Because the family of Epson printers shares a great many
commands, you can use an application program even if it does not
list your printer on its selection menu. If the printer is not listed,
choose one of the following printers. They are listed in order of
preference.
LQ-2550
LQ-2500
LQ-850 (LQ-1050)
LQ-500
LQ-800 (LQ-1000)
LQ-1500
If none of the above printers is listed, select the first one available on
the following list: LQ, EX, FX, LX, RX, MX, Epson printer, Standard
printer, Draft printer.
To use all of the features of the printer, however, it is best to use a
program with your printer on its menu. If an application program
does not list the printer, contact the software manufacturer to see if
an update is available that supports your model.
Setting Up the Printer
1-25