Filter
Top Products
The illustration below shows a good printer location.
Note: Before using a printer stand, read these requirements and
suggestions.
l
The stand should be able to support at least twice the weight of
the printer.
l
Never use a stand that supports the printer at an angle of
more than 15 degrees from horizontal.
l With a cut sheet feeder, your printer must be kept level.
l If your paper supply is positioned below the printer stand,
make sure there is enough clearance to keep the paper from
catching on the underside of the stand. Also, make sure the
distance between the stand supports is wide enough for the
paper you are using.
l
Position your printer’s cables so that they do not interfere with
paper feeding. If possible, secure the cables to the printer stand.
1-6
Setting Up the Printer