Epson 1010 Printer User Manual


 
The DIP Switch Functions
Auto line feed
When auto line feed is on (DIP switch 2-4 on), each carriage return
code (CR) is automatically followed by a line feed code (LF).
Input buffer capacity
The input buffer stores data from your computer. If you want to free
your computer for other tasks while the printer prints, change the
setting of switch 2-5 to 8 KB (on). Before using user-defined
characters, however, be sure to set the input buffer to 1 KB (off).
Printing direction
With unidirectional printing, the print head prints in one direction
only. This allows for precise vertical alignment, making it ideal for
printing graphics such as lines and boxes. With bidirectional
printing, the print head prints in both directions. This is faster than
unidirectional printing.
When DIP switch 2-6 is off, the printer prints unidirectionally; when
it is on, the printer prints bidirectionally. Either setting can be
overridden by a software command (ESC U).
To achieve precise vertical alignment without the slower printing
speed caused by unidirectional printing, see your dealer for
adjustment of your bidirectional print settings.
Tear-off mode
When DIP switch 2-2 is on, the short tear-off mode is on. This feature
automatically advances continuous paper to the tear-off position,
and then reverse-feeds the paper to the loading position. See Using
Short Tear-off later in this chapter.
CAUTION:
Do not use the short tear-off mode with labels.
3-14
Using the Printer