Filter
Top Products
Cause What to do
You may not be using the correct type of paper for your
printer.
If the surface of your paper is too rough, printed characters may
appear distorted or broken. Smooth, high-quality copier paper is
recommended for best results. See “Available paper types” on
page 252 for information on choosing paper.
Completely blank pages are output
Cause What to do
The printer may have loaded more than one sheet at a
time.
Remove the paper stack and fan it. Tap it on a flat surface to even
the edges, then reload the paper.
The problem may be with your application or interface
cable.
Print out a configuration status sheet. See “Printing a
Configuration Status Sheet” on page 195. If a blank page is
ejected, the problem may be with the printer. Turn off the printer
and contact your dealer.
The Paper Size setting may be incorrect. Make sure the correct paper size is set in the Tray Menu on the
control panel.
The MP Tray Size setting may be incorrect. When loading paper for which the size is not specified with Auto
setting, specify the correct paper size on the MP Tray Size
setting in the Tray Menu on the control panel.
One of the toner cartridges may be near the end of its
service life.
If the message on the LCD panel or in EPSON Status Monitor
indicates that one of the toner cartridges is near the end of its
service life, replace the toner cartridge. See “Toner Cartridge” on
page 161.
For Windows users, you can also check the remaining service life
of the toner cartridge by looking at the Basic Settings tab in the
printer driver.
For Mac OS X 10.5 users, you can check the remaining service life
of the toner cartridge by looking at Supply Levels in the printer
driver.
There may be a problem with photoconductor units. Replace the photoconductor units. See “Photoconductor Unit” on
page 165.
The printed image is light or faint
Cause What to do
Your paper may be moist or damp. Do not store your paper in a humid or damp environment.
EPSON AcuLaser C9200 Series User's Guide
Troubleshooting 203