Epson C9200 Series Printer User Manual


 
When printing on envelopes, open cover A and cover B, and then push down the release levers at
both sides of the fuser unit until they stop. It may reduce the wrinkles in the envelopes. When using
paper other than envelopes, be sure to push the levers back up.
*
* envelope position
w
Warnings
Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked
CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use,
the fuser and the surrounding areas may be very hot. If you must touch one of these areas,
wait 30 minutes to allow the heat to subside before doing so.
Thick paper
Available paper source:
MP tray
Printer driver settings:
Paper Size: A4, A3, A5, B4, B5, LT, HLT, LGL, GLT, GLG, B, EXE, F4, A3F
Paper Source: MP Tray
Paper Type: Thick/Thick (Back) (for 91 to 150 g/m paper), Extra Thick/Extra Thick (Back)
(for 151 to 209 g/m paper), Super Thick/Super Thick (Back) (210 to 256 g/m
paper)
EPSON AcuLaser C9200 Series User's Guide
Printing Tasks 42