Filter
Top Products
Maintaining the Projector 101
Cleaning and Replacing the Air Filters
Clean the air filters on the bottom of the projector after every 100
hours of use. If they are not cleaned periodically, they can become
clogged with dust, preventing proper ventilation. This can cause
overheating and damage the projector.
To clean the air filters, follow these steps:
1. Turn off the projector and unplug the power cord.
2. To clean the filters, EPSON recommends using a small vacuum
cleaner designed for computers and other office equipment. If you
don’t have one, gently clean the filters with a soft brush (such as
an artist’s paintbrush).
3. If the dirt is difficult to remove or a filter is broken, replace the
filters as described on the next page. Contact your dealer or call
EPSON at (800) 873-7766 in the United States to obtain new
ones. In Canada, please call (800) 463-7766 for dealer referral.
note
When you get a replacement
lamp for your projector, new
air filters are included. You
should replace the filters
when you replace the lamp.