Filter
Top Products
52 Giving Your Presentation
Controlling Multiple Projectors
If you’re using more than one projector, you can control all the
projectors—or just selected ones—by using the projector ID system.
To operate a projector, you have to set the remote control’s ID to
match that of the projector. Or you can control all of the projectors
simultaneously by setting the remote control’s ID to zero.
Setting the Projector ID
The projector’s default ID is 1. If you need to change it, follow these
steps:
1. Press the
Menu button on the remote control.
You see the projector’s menu screen.
2. Enter the
Advanced2 menu and highlight Projector ID.
3. Press the right or left side of the pointer button to increase or
decrease the ID value.
4. Press
Enter to set the value.
5. When done, press
ESC to exit the menu system.
Brightness Control
Brightness Control
High
High
Low
:
Video
Audio
Setting
User’s Logo
Advanced1
About
Reset All
Projector ID
Projector ID
Network
Network
Reset
Reset
Execute
Execute
: 1
[Menu]: Exit
[Menu]: Exit
Effect
Advanced2
COM Port
COM Port
BNC Sync
BNC Sync
Termination
ermination
:
ON
ON
OFF
OFF
:
Set
Set
Set
Set
RS-232C
RS-232C
USB
USB
[ / ]: Select
[ / ]: Select
[ ESC ]: Return
[ ESC ]: Return
[ ]: Set
[ ]: Set
Auto Setup
Auto Setup
:
OFF
OFF
:
ON
ON