Filter
Top Products
Displaying and Adjusting the Image 45
■ Or press the Menu button on the remote control,
select the
Setting menu, and press Enter. From
the Setting menu, select
Keystone and press
Enter. Then select V-Keystone and press Enter.
Adjust the setting as needed.
When corrected, the image will be slightly
shorter. If necessary, you can stretch the image to
its proper size using the
Height setting.
Using QuickCorner
Use QuickCorner to correct the image shape when it’s uneven on all
sides.
1. Press the
Menu button on the remote control (or on the
projector’s control panel).
2. Select the
Setting menu and press Enter.
3. From the Setting menu, select
Keystone and press Enter.
4. Select
Quick Corner and press Enter.
You see this screen:
5. Press the
Enter button to select the corner you want to adjust.
6. Use the pointer button on the remote control (or the arrow
buttons on the projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining corners.
8. When done, press
ESC to exit the menu system.
Menu button
note
For more information on
using the menu system, see
page 66.
[ ]:Adjust
Adjust
[ ] :Move next
[ ] :Move next
[ESC]
[ESC]
:Return (Press 1 second to
:Return (Press 1 second to
reset)
reset)
/