Filter
Top Products
Maintaining the Projector 105
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menu.
1. Press the
Menu button on the remote control (or on the
projector’s control panel). You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
About, then press Enter.
You see this screen:
3. Select
Reset Lamp Timer, then press Enter. You see this
prompt:
4. Select
Yes, then press Enter.
5. When you’re finished, press
ESC or Menu to exit.
note
The lamp usage timer shows
0H until you’ve used the
lamp for at least 10 hours.
Video
Audio
Setting
User’s Logo
Advanced1
About
Reset All
Frequency
Frequency
Source
Source
V ---.---Hz
V ---.---Hz
Reset Lamp Timer
Reset Lamp Timer
H ---.---kHz
H ---.---kHz
Lamp
Lamp
0H
0H
SYNC Mode
SYNC Mode
SYNC Polarity
SYNC Polarity
------
V ------
V ------
H ------
H ------
Resolution
Resolution
Refresh Rate
Refresh Rate
---.-- Hz
---.-- Hz
----x ----
----x ----
Computer1
Computer1
Input Signal
Input Signal
:
:
:
:
:
:
:
:
: Analog-RGB
Analog-RGB
Execute
Execute
[ ]: Select
[ ]: Select
[ ]: Enter
[ ]: Enter
[Menu]: Exit
[Menu]: Exit
Effect
Advanced2
:
Lamp usage
Reset Lamp Timer
Reset Lamp Timer
Execute?
YES
NO
Reset Lamp Timer
Reset Lamp Timer
Execute?
YES
NO