Filter
Top Products
94 Managing the Projector from a Remote Computer
Creating the E-Mail Settings
1. If EMP NetworkManager is not already running, open it from
the Start menu.
You see your registered projectors displayed as shown:
2. Double-click the icon for the projector whose e-mail settings you
want to create. Enter your password, if you created one (see
page 93).
3. EMP NetworkManager connects to the projector, and you see
this screen:
4. Verify that the network settings are correct.
■ Make any desired changes to the projector’s network address
configuration (turning off DHCP enables the manual
settings).
note
The projector must be
plugged in (projecting or in
standby mode) for you to be
able to connect to it.
To access a projector in
standby mode, you must
select
Network ON as the
Standby Mode setting in
the projector’s menu system
(see page 76).