Filter
Top Products
36 Displaying and Adjusting the Image
Projecting the Image
Make sure your projector and other equipment are set up as described
in Chapter 1. Then follow the instructions below to start the projector
and display an image.
Turning On the Projector
If you turn on your connected computer or video equipment before
starting the projector, the projector automatically detects and displays
the image source. If you turn on the projector first, or have multiple
pieces of connected equipment, you may have to select the image
source manually (see page 38).
Follow these steps to turn on the projector:
1. Remove the lens cap.
2. Connect the power cord to the projector, then plug the other end
into a grounded electrical outlet.
The power light turns on and remains orange.
note
To shut down the projector,
see page 47. Shutting down
the projector correctly
prevents premature lamp
failure and possible damage
from overheating.