Filter
Top Products
70 Fine-tuning the Projector
4. Adjust the
Sync setting to reduce blurriness by pressing the
left or right side of the pointer button. (Be sure to adjust
the tracking first for best results.)
■ Resolution (in the Video menu)
If your image is distorted (compressed, stretched, partially cut off,
or doesn’t completely fill the display area), the projector’s
resolution setting may not match that of your computer. Select
Auto to let the projector adjust the resolution automatically; or
select
Manual and then press Enter to adjust the setting yourself.
■ Position (in the Video menu)
If the image is slightly cut off on one or more sides, it may not be
centered exactly. You can use this setting to center it.
■ Preset (in the Video menu)
Once you’ve fine-tuned the settings in the Video menu for the
computer you’re using, you can save them as a group, using of one
of the ten
Preset settings:
1. From the Video menu, select
Preset and press Enter.
2. Select a number (1 to 10).
3. Press
Enter, then select Yes to overwrite.
4. Press
ESC to exit the menu system.
The next time you use the same computer, simply press the
Preset button on the remote control to recall your saved settings.
(Press the
Preset button repeatedly to select the number
corresponding to the Preset setting you want to use.)
Preset
button