Filter
Top Products
5
Managing the Projector from a Remote Computer 81
1
Managing the Projector from
a Remote Computer
Your projector’s EasyManagement software lets you monitor and
control your projector(s) from a remote computer. (The topics
covered in this chapter are intended for use by network
administrators.)
■ Use EMP Monitor to see your projectors’ status, switch image
sources, and control basic settings.
■ Use EMP NetworkManager to receive e-mail notifications
alerting you to possible problems.
■ Use EMP Multi Screen Adjustment to make your image appear
consistent when you are combining multiple projectors to display
a single, large image.
To use the EasyManagement software, first install it as described on
page 82. Then connect and configure each projector you want to
monitor, so it can be recognized on your network (see page 84).
This chapter covers the following:
■ Installing the EasyManagement software
■ Configuring the projector to your network
■ Using EMP Monitor
■ Using EMP NetworkManager
■ Installing the EMP Multi Screen Adjustment Software
note
You may also be able to
monitor your projector(s)
through a network
management utility, such as
HP OpenView.
™
You’ll need
to install a plug-in for your
system provided by EPSON,
then enter a trap IP address
using the
SNMP option in
the projector’s menu system
(see page 85).