Filter
Top Products
Fine-tuning the Projector 77
■ COM Port (in the Advanced2 menu)
Used by servicers for communicating with a computer running
utility software.
Miscellaneous Setup Options
■ No-Signal Msg. (in the Setting menu)
Selects a screen color or image to display when the projector is
not receiving a signal. The logo setting displays an image that
you previously transferred to the projector (see page 63).
■ Message (in the Setting menu)
Turns off the identifying text that appears briefly when you
switch picture sources or change color modes. (It’s best to
leave this on.)
■ Sleep mode (in the Setting menu)
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for 30 minutes. Turn sleep
mode off if you want the lamp to remain on all the time (this
is the default setting).
■ Rear Proj. (in the Advanced1 menu)
Turn on to project from behind onto a transparent screen.
■ Ceiling (in the Advanced1 menu)
Turn on when the projector is mounted upside-down from
the ceiling.
■ Language (in the Advanced1 menu)
Select from nine languages to be used for the projector
menus.