Epson TM-P60 Label Maker User Manual


 
Rev. B Consumable Specifications F-3
TM-P60 with Peeler Technical Reference Guide
Roll paper end treatment:
For best print quality and reliability, select the proper print density for the paper type
used. See the table below. Print density can be set with a memory switch.
Requirement for die-cut label and black mark:
Roll Paper No. Original Paper
No.
Density Level
ETLA series - 100%
TF50KS-E 100%
P350 90%
P300, P310 95%
When die-cut labels are used
Paper detection by detecting edge of label