Rev. B 2-21 Setup
TM-P60 with Peeler Technical Reference Guide
3. Click the “Wireless“ Tab
4. Set following items for the wireless LAN installed the printer.
• Communication mode (Network mode): (Check to “Infrastructure.“ (If you don’t check
it, it is checked automatically))
• SSID
• WEP key, and active WEP key
Note:
Change the SSID from default and define WEP key to secure your wireless LAN.
We recommend to define WEP key as 128bit, Hexadecimal to secure security.
This printer doesn’t support the blank SSID ““(any). Enter one character into the SSID at least.
Ad-Hoc mode is for default value only.
For detail of setting items, see “Setting Using a Web Browser” on page A- 28.
5. Click the “TCP/IP” tab.