2-18 Setup Rev. B
3. Confirm the printer is shown in the list view.
Note:
If the printer isn’t shown in the list view, check following item. See Appendix A for details of the
utility function.
• Turn the printer on.
• Without connecting a serial cable to the TM-P60 with Peeler, confirm that the “Search
Method,“ and “Search Option IP“ are correct. You have to set it to correspond to the
printer.
“Search Path“; Menu:Tool -> “Search Method.“
(You should check “Search Path selection: select All“)
“Search Option IP“; Menu:Tool -> “Search Option“ -> “IP“
(You should set the IP address and subnet mask to search.
See “Search Options - IP” on page A- 17 for details)
• When you use serial cable, confirm connect a serial cable to the TM-P60 with Peeler and
host PC, and turn the printer on again.
• With connecting a serial cable to the TM-P60 with Peeler and host PC, confirm that the
“Search Method,“ and “Search Option COM“ are correct. You have to set it to
correspond to the printer.
The your printer is shown in here.
Search Method Search Option IP