Filter
Top Products
Rev. B Consumable Specifications F-5
TM-P60 with Peeler Technical Reference Guide
Example: Liner width: 59.5 mm/Label width: 56 mm
Note:
The printable area may be out of alignment by 2.8 mm {0.11"} maximum (left or right), due to the paper
position or tolerance of parts. To make the margin for both sides safely, it is recommended to set a margin
of 2.8 mm {0.11"} or more. (Numeric values used here are average values for designing.)
❏ Paper Width and Printable Area (Recommended)
(It is assumed that the label is placed on the center of the liner exactly. Numeric values used
here are average values for designing.)
Liner width (mm) 59.5 57.5 54.5 48 41.5 35.5 29
Label width (mm) 56 54 51 44.5 38 32 25.5
Printable Area (mm) 50 48.5 45 38 32 26 20
Left margin (mm) 3 3 3 3 3 3 3
Right margin (mm) 3 3 3 3.5 3 3 2.5
Positioning dot number 17~416 17~404 17~376 17~320 17~272 17~272 17~176
59.5 ± 0.5
52
56 ± 0.5
4.754.75
1.5
Printable Area
Programmable by
control command
1.75±0.75
1.75
±
0.75
17dot 416ot
Printable Area
1.5
[Units: mm]
50