Epson TM-P60 Label Maker User Manual


 
2-24 Setup Rev. B
6. Set the following items for the wireless LAN installed the printer.
Get IP Address
Set using Automatic Private IP Addressing (APIPA)
•Set using PING
IP Address setting (IP address, Subnet Mask, Default Gateway)
When you select the method “Get IP Address: Auto,“ you can omit the IP address setting.
7. Click the “submit” button.
8. The the printer off and back on; the changes have now been made.
Note:
We recommend to confirm the changed wireless LAN setting by status sheet printing after changing
the LAN setting. (see “Confirming the current LAN setting of the printer” on page 2- 15)
Confirm the connection between your LAN and printer
Transmit “ping” command to the printer from PC in the LAN to which the printer is connected
to confirm the connection. If a reply isn’t returned from the printer, retry these procedures from
the first after reset the wireless LANsetting of printer.
Install a Printer Driver in the Host PC / POS Terminal
EPSON provides printer drivers for the TM-P60 with Peeler. The drivers are OPOS and
Advanced Printer Driver (APD). They are for the Windows® environment.
OPOS
Installing and setting up
When you install and set up, please refer to the User's Manual, the file is automatically created
during the installation of the OPOS ADK.