Filter
Top Products
A-12 Wireless LAN Setup Detailed Information Rev. B
CAUTION:
Be sure that the Set using PING box is turned on if a setting by PING or ARP command is
permitted.
6. Click the OK button.
7. Click the OK button again to be sure.
8. Enter the password set in the print server; then click OK. If the password is not set, just click
OK without entering a password.
Note:
For information on the password function, see “password” on page A-27.
CAUTION:
After clicking OK, you must not turn off the printer while the new settings are being sent
to the TM-P60.
9. The update is complete when the message “Configuration has been successfully completed”
appears; then click OK.