Epson TM-P60 Label Maker User Manual


 
2-28 Setup Rev. B
Advanced Printer Driver (APD)
Installing and Setting Up
When you install and set up the APD, please refer to the “EPSON Advanced Printer Driver
Install Manual.“ The Manual is a PDF file, which is provided with other manuals for the APD.
Outline of installation and setup procedure is as follows.
1. Install EPSON Advanced Printer Driver
Execute the installer “ADT###e.exe,“ and select modules which you need. The recommended
modules are shown below. Refer to the installation manual for details.
Note:
For the Manual, Sample program, and each utility, you have to download separately the
ADT###e.exe.
2. Set up the printer port
After installing the APD, you need to adjust the printer port setting for the printer interface model.
See the Installation manual and the User’s manual for details.
3. Test print
Execute a test print from the “property” of the printer to confirm the setting. If the test print is not
correct, please see the “Notes” on the “User’s Manual” and “Status API Reference
Manual” to solve the your problem.
Note:
You can use the printer with sample program (written in Microsoft Visual Basic, Visual C++). The
sample program is provided separately.
EPSON TM-P60 with Peeler
Receipt
This module is required for printing.
Status API:
This module is required for monitoring the printer. This
module provides API to monitor the printer’s status.
1. Install EPSON Advanced Printer Driver
Select the modules needed to install:
TM-P60 with Peeler, Status API
2. Set up the printer port
3. Test print